Merten offers you a number of control interfaces which enable convenient operation and provide a clear overview when setting the KNX. The award-winning PLANTEC display and control units are particularly versatile, as is the merten@home control interface. And if you wish to control complex building functions in commercial buildings, the proven B-CON software applications are the obvious choice.
SYSTEM M
A wide array of functions and designs.
Room temperature control unit as a KNX solution The new KNX room temperature control unit from Merten. The module controls individual heating valves or several at once, and is available in all System M and System Design colour variants.
Multi-function push-button with room temperature control unit The System M multi-function push-button with room temperature control unit is available as a 2-gang and 4-gang push-button. You can control your light, blind, and heating from a single control unit. It has never been easier or more convenient to save energy and installation costs.
Plus push-button The new KNX 1/2/4-gang plus push-buttons have the bus coupler already integrated into them, which makes them easy to fit as complete units. The completely reworked software means KNX plus push-buttons also combine a lot of new functions such as a disable functions, or the ability to call up and store complete lighting scenes, and flank control with differentiation between a long and a short pressing of the push-button. Red LEDs indicate the button status, and a green one the push-button operation. The 4-gang plus push-button is also available with an IR receiver.
Conventional push-buttons Conventional push-buttons can be incorporated into KNX with the 2-gang plus and 4-gang plus KNX button interfaces. Connection to KNX also enables light scenes to be called up with the push-button. Dimming to a pre-set brightness values is also possible.
SYSTEM DESIGN
Diversity over the whole area and the whole range.
Multi-function push-button and plus push-button The ARTEC multi-function push-button with its room temperature control unit combines two devices into one: A multi-function push-button for controlling lights, scenes and blinds and an intelligent control unit for on-demand, timer-controlled room temperature control. Scenes can be stored and called up using any key.
Plus push-button The new KNX 1/2/4-gang plus push-buttons have the bus coupler already integrated into them, which makes them easy to fit as complete units. The completely reworked software means KNX plus push-buttons also combine a lot of new functions such as a disable functions, or the ability to call up and store complete lighting scenes, and flank control with differentiation between a long and a short pressing of the push-button. Blue LEDs not only show the function status and push-button operation but also make an elegant impression. The 4-gang plus push-button is also available with an IR receiver.
TRANCENT glass push-button Switches can be beautiful. The lightest of touches on the glass surface is enough to dim the lights, switch them on and off, or control the blinds. TRANCENT - clear, flat, discreet and with an exposed glass surface and the option of integration into intelligent KNX building technology. TRANCENT can also be labelled individually.
ANTIK - the stylish alternative KNX switches in ANTIK design combine state-of-the-art switch technology with self-assured elegance. The right range for modern building control in a high-class ambience.
MERTEN@HOME
The innovative user interface for building control. No matter where you are, you are always at home.
The control paradise You can control, set and display all building functions directly with just a few clicks. Four convenient control options are available to you: floors, rooms, functions and programmes.
Control with Touchpanel With the 10" IP Touch-Panel you can always keep track and keep control. Building statuses and functions can be displayed clearly and controlled conveniently with this unit. The power supply is carried out via the TFT display. The IP touch panel has LAN (10/100 Mbit/s), RS 232 and USB connections. It can be installed in a flush-mounted or cavity wall mounting box. The front cover in M-PLAN design is available in aluminium or as a real glass frame.
Resolution: 800x600 pixel colours: >65.000
Control via PDA Imagine being able to switch on the underfloor heating at home to a warm and cosy temperature from the WLAN hotspot before you even leave the airport at the end of a long business trip. Imagine being able to check your building monitoring system from an Internet café while on holiday. Nothing could be easier! The merten@home operator interface can also be viewed on a PDA and easily managed. With merten@home you are at home wherever you are.
